2009年11月24日

Wake On Lan ( MagicPacket ) Repeater & Sender

Wake On Lan ( MagicPacket ) Repeater & Sender I made a "arduino WOL Repeater" with ethernet shield yesterday.

Today, I just made additional function for arduino WOL Repeater.

You can select three target PCs and send MagicPacket when you push the button.

Also, It is using bjoern / arduino_osc Library for UDP.

I am using "sndmagic version 0.2" to send a magic packet from outside of network.

You can get "sndmagic" following website:
http://www.st.rim.or.jp/~yumo/pub/sndmagic_chglog.html

If you have got other software, please change the value of localPort.

Wake On Lan ( MagicPacket ) Repeater & Sender


// Wake On Lan ( MagicPacket ) Repeater & Sender

// http://yutakalifenet.up.seesaa.net/html/wolRepeaterSender.html
// Digital 7, push button

// Analog 0, variable resistor

#include <WString.h>
#include <Ethernet.h>

#include <UdpRaw.h>

#include <LiquidCrystal.h>

// LiquidCrystal display with:
// rs on pin 10
// rw on pin 9
// enable on pin 8 
// d0, d1, d2, d3 on pins 5, 4, 3, 2

// initialize the library with the numbers of the interface pins

LiquidCrystal lcd(10, 9, 8, 5, 4, 3, 2);

// You can set up 3 target PCs 
byte TargetMac1[] = { 0x00,0x00,0x00,0x00,0x00,0x00 }; // set a MAC for hostName1

byte TargetMac2[] = { 0x00,0x00,0x00,0x00,0x00,0x00 }; // set a MAC for hostName2
byte TargetMac3[] = { 0x00,0x00,0x00,0x00,0x00,0x00 }; // set a MAC for hostName3

//                  1234567890123456      please set 16 letters
char hostName1[] = "  hostName1     "; // set your target PC's name
char hostName2[] = "  hostName2     "; // set your target PC's name

char hostName3[] = "  hostName3     "; // set your target PC's name

// ETHERNET CONFIGURATION
byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; // MAC address

byte ip[] = { 192, 168, 1, 200 }; // Arduino IP address
byte gw[] = { 192, 168, 1, 1 };   // Gateway IP address

int localPort = 7; // local port to listen on
// I am using "sndmagic version 0.2" to send a magic packet from outside of network.
// You can get it following website:
// http:www.st.rim.or.jp/~yumo/pub/sndmagic_chglog.html

// If you have got other software, please change the value of localPort.

// set a target broadcast address
byte targetIp[] = { 192, 168, 1, 255}; // set this value like "x.x.x.255"

int targetPort = 8000; // target port

#define MAX_SIZE 192         
// maximum packet size
byte packetBuffer[MAX_SIZE]; // buffer to hold incoming packet
int packetSize;              // holds received packet size

byte remoteIp[4];            // holds recvieved packet's originating IP

unsigned int remotePort;     // holds received packet's originating port

int i;


int packetLen = 102;
byte packet[102];


void setup() {
    Ethernet.begin(mac,ip,gw);
    UdpRaw.begin(localPort);

    lcd.begin(2,16);
    lcd.clear();
    lcd.setCursor(4,0);
    lcd.print("arduino");
    lcd.setCursor(2,1);
    lcd.print("WOL Repeater");
    delay(2000);
    lcd.clear();

    //  initialize D7 pin as an output:

    pinMode(7,INPUT);
    Serial.begin(9600);
}

void loop() {
    // read the value from the variable resistor and the value divide by 341:
    int val = analogRead(0)/341;

    switch (val) {
        case 1:
            lcd.print(" Target host:   ");
            lcd.setCursor(0,1); lcd.print(hostName1);
            break;
        case 2:
            lcd.print(" Target host:   ");
            lcd.setCursor(0,1); lcd.print(hostName2);
            break;
        case 3:
            lcd.print(" Target host:   ");
            lcd.setCursor(0,1); lcd.print(hostName3);
            break;
        default:
            lcd.print(" Target host:");
            lcd.setCursor(0,1); lcd.print(hostName1);
    }

    // to make a packet, if D7 input is HIGH:

    if(digitalRead(7)==HIGH){
    delay(100);

    packetSize = 126;
    Serial.println(""); Serial.println("Sent packet to:"); Serial.println("");

    for (int i = 0; i <= 5; i++){
        packet[i] = 0xFF;
    }

    for (int i = 6; i <= packetLen; i++){
        int j = abs((packetLen - i) % 6 - 6);
        if ( j == 6 ) j = 0;
        // to switch over by the value from the variable resistor

        switch (val) {
            case 1:
                packet[i] = TargetMac1[j];
                break;
            case 2:
                packet[i] = TargetMac2[j];
                break;
            case 3:
                packet[i] = TargetMac3[j];
                break;
            default:
                packet[i] = TargetMac1[j];
        }
    }

    if ( val == 1 ){
        UdpRaw.sendPacket(packet,packetLen,targetIp,targetPort);
        lcd.clear(); lcd.print("SentMagicPacket:");
        lcd.setCursor(0,1); lcd.print(hostName1);
        Serial.println(""); Serial.println(hostName1); Serial.println("");
        delay(1000);
    }
    if ( val == 2 ){
        UdpRaw.sendPacket(packet,packetLen,targetIp,targetPort);
        lcd.clear(); lcd.print("SentMagicPacket:");
        lcd.setCursor(0,1); lcd.print(hostName2);
        Serial.println(""); Serial.println(hostName2); Serial.println("");
        delay(1000);
    }
    if ( val == 3 ){
        UdpRaw.sendPacket(packet,packetLen,targetIp,targetPort);
        lcd.clear(); lcd.print("SentMagicPacket:");
        lcd.setCursor(0,1); lcd.print(hostName3);
        Serial.println(""); Serial.println(hostName3); Serial.println("");
        delay(1000);
    }

    lcd.clear();

    Serial.println("Magic packet ordering Done!");

    for (int i = 0; i < packetLen; i++){
        Serial.print(packet[i], HEX);
        Serial.print(" ");
    }
    Serial.println(""); Serial.println("");
    }

    // to forward a packet, if incoming packet is available

    if(UdpRaw.available()) {
        packetSize = UdpRaw.readPacket(packetBuffer,MAX_SIZE,remoteIp,(uint16_t *)&remotePort);

        Serial.print("Received packet of size ");
        Serial.println(abs(packetSize));

        Serial.print("From IP ");
        for(i=0; i<3; i++) {
            Serial.print(remoteIp[i],DEC);
            Serial.print(".");
        }
        Serial.print(remoteIp[3],DEC);

        Serial.print(" Port ");
        Serial.println(remotePort); 

        if(packetSize < 0) {
            Serial.print("ERROR: Packet was truncated from ");
            Serial.print(packetSize*-1);
            Serial.print(" to ");
            Serial.print(MAX_SIZE);
            Serial.println(" bytes.");
        }

        Serial.println("Contents:");
        for(i=0; i<min(MAX_SIZE,abs(packetSize)); i++) {
            Serial.print(packetBuffer[i],HEX);
            Serial.print(" ");
        }
        Serial.println("");

        // send a magic packet

        UdpRaw.sendPacket(packetBuffer,packetSize,targetIp,targetPort);
        Serial.println("Start port forwarding to broadcast address:");
        for(i=0; i<3; i++) {
            Serial.print(targetIp[i],DEC);
            Serial.print(".");
        }
        Serial.print(targetIp[3],DEC);
        Serial.println("");
        Serial.println("Done!");


        lcd.clear(); lcd.print("Received packet"); delay(2000);
        lcd.clear(); lcd.setCursor(4,0); lcd.print("From IP:");

        lcd.setCursor(0,1);
        for(i=0; i<3; i++) {
            lcd.print(remoteIp[i],DEC);
            lcd.print(".");
        }
        lcd.print(remoteIp[3],DEC); delay(2000);

        lcd.clear(); lcd.print("Target MAC:");

        lcd.setCursor(0,1);
        for(i=6; i<11; i++) {
            lcd.print(packetBuffer[i],HEX);
            lcd.print(":");
        }
        lcd.print(packetBuffer[11],HEX); delay(2000);

        lcd.clear(); lcd.print(" Target host:   "); 
    }
}
ラベル:WOL Repeater
posted by love4nature at 00:00| Comment(0) | arduino | このブログの読者になる | 更新情報をチェックする
この記事へのコメント
コメントを書く
お名前:

メールアドレス:

ホームページアドレス:

コメント:

認証コード: [必須入力]


※画像の中の文字を半角で入力してください。
×

この広告は1年以上新しい記事の投稿がないブログに表示されております。